BTU, EER, & SEER  View Home Models >>

BTU, EER, & SEER


A few basic concepts to understand when you are shopping for an air conditioner are BTU, EER, and SEER.

BTU
BTU stands for British Thermal Units. Air conditioners are given BTU ratings to show their cooling capacity. In technical terms, one BTU is the amount of heat needed to bring the temperature of one pound of water up by one degree Fahrenheit. You may have also heard of air conditioner capacity referred to by the ton. In the parlance of HVAC (Heating Ventilation and Air Conditioning), one ton equals 12,000 BTU. You can use BTU ratings to determine what size air conditioner you need to cool your space. Generally speaking, you need 20-30 BTU per square foot that you need cooled. However, if the area to be cooled has factors that increase or decrease the load on the air conditioner, you will need to alter your estimate of your BTU requirements. Here is a chart that estimates BTU requirements per square foot:


Area To Be Cooled (ft2)
Estimated Capacity (BTU/Hour)
100-150
5,000
150-250
6,000
250-300
7,000
300-350
8,000
350-400
9,000
400-450
10,000
450-550
12,000
500-700
14,000
700-1,000
18,000

Source: Energystar.gov

Here are a few factors that might increase or decrease the BTU capacity that you require:

  • Reduce your required capacity by 10% if your room is heavily shaded
  • Increase your capacity by 10% if your room is very sunny
  • Add 600 BTU to your capacity each additional person (beyond two people) that regularly occupies the room
  • Add 4,000 BTU if the room is a kitchen

  • Source: Energystar.gov

More information on BTU:
howstuffworks.com: How Air Conditioners Work- BTU and EER
dictionary.com: BTU


EER
EER stands for the Energy Efficiency Rating. Essentially, the EER lets you know how much cooling capacity from a given amount of electricity. The higher the EER, the more energy efficient an air conditioner is. If you are comparing two air conditioners with similar BTU capacity, you might check out their EER to help you make a decision. An air conditioner's EER is found by dividing its BTU capacity by its running wattage.



EER
   BTU   
Wattage = EER


To put it another way, the higher the EER, the less energy the air conditioner consumes in order to produce cooling. However, units with higher EER generally cost more up-front than less efficient units. In order to decide between a more efficient and a less efficient model, you might perform a little calculation, as shown in the box below:

How to calculate the value of EER ratings
To compare the value of two different air conditioners with equal BTU capacities, you need to know a few things:
  • The estimated number of hours per year that you would use the air conditioner
  • The estimated cost per kilowatt hour (kWh) for energy
  • The wattage of the two different units
  • The cost differential between the two different units

Now you can use this formula:
Hourly usage per year times Wattage difference between the two units divided by 1000 equals your savings in kilowatts (kWh) per year.
Now, multiple this times Your cost per kWh (you can find this on your electric bill) and it equals
The amount of money saved per year by using the more efficient (higher EER) air conditioner.
Now, to find the value of the air conditioner with the higher EER, simply take the cost differential divided by the amount of money saved per year and this will equal the number of years to recoup the cost differential between the two units.


Generally, an EER of 10 or above is considered good, and EnergyStar air conditions have are rated with a 10.7 EER or higher.

More information on EER:
howstuffworks.com: How Air Conditioners Work- BTU and EER
ACE3: Consumer Guide to Home Energy Savings - Air Conditioning

SEER
SEER stands for Seasonal Energy Efficiency Rating. It is similar to the EER, but SEER is usually used to rate central air conditioning units, while EER is generally used for window units and other, smaller air conditioners. Again, SEER is a measure of how efficiently an air conditioner turns electricity into cooling. The higher the SEER, the more efficient the air conditioner. SEER is figured out by dividing the Annual BTU Cooling divided by Total Watt Hours equals SEER.



SEER
Annual BTU Cooling
   Total Watt Hours    = SEER



As with smaller air conditioners, with other features being equal, the up-front cost of an air conditioner with a higher SEER will likely cost more than a system with a lower SEER, but the higher SEER air conditioner will use less money over its life, and might be a more economical choice in the long term. Another factor to consider is that an older central air conditioner might have a substantially lower SEER than a new central air conditioning unit, so it might make financial sense to replace an older central air conditioner with a newer, more efficient model.
Generally, a SEER of 12 or above is considered very efficient, although some central air conditioners claim SEER approaching 20!

More information on SEER:
Climate Masters: Rate Your System's Energy Efficiency
ACE3: Consumer Guide to Home Energy Savings - Air Conditioning

Browse our Heater Category:
CompactAppliance.com: Heaters

Have a question? Call 1-800-297-6076
VeriSign Secured >> Click to verify.
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Copyright © 2014 Living Direct, Inc. All Rights Reserved. Privacy Policy | Terms & Conditions