DHC102 - Stiebel Eltron Point of Use Electric Tankless Water Heater

Stiebel Eltron Point of Use Electric Tankless Water Heater

The Stiebel Eltron DHC 10-2 Electric Water Heater is designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated. The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The DHC 10-2 Electric Water Heater is shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters.

Stiebel Eltron DHC 10-2 Electric Water Heater Features: Up to 50% less electric consumption compared to storage type heaters, hot water instantly, with exclusive built-in scald guard thermostat, fits anywhere due to its lower installation cost in comparison to storage type water heaters.

Requires 1 independent 240V AC circuit protected by 1 separate and independent 40 amp double pole breaker. Minimum recommended electrical service is 50 amps.

Other Features Include:

• No scalding: electronic control system does not allow the water temperature to go above 125º F
• Simple design of plumbing system: no need for a T & P valve, drain or mixing valve

Heating Capacity:

• 80º F Rise at 0.8 gpm
• 70º F Rise at 0.9 gpm
• 60º F Rise at 1.1 Gpm
• 50º F Rise at 1.3 gpm
• 40º F Rise at 1.6 gpm

Primary Specifications

• Heats up to 1.6 gpm at 40º F rise
• Simple design of plumbing system, no need for a T & P valve, drain or mixing valve
• Minimum water flow to activate unit 0.79 GPM/3.0 l/min
• Warranty: 3 Year Parts
• No scalding: electronic control system does not allow the water temperature to go above 125º F
• # Of Applications: 1 Sink (bathroom, kitchen, or utility)
• Weight: 5 pounds
• Dimensions: 14 3/16"h x 7 7/8"w x 4 1/8"d

Technical Specifications

• # Of Applications: 1 sink (point of use)
  
• Minimum water flow to activate unit 0.79 GPM/3.0 l/min.
  
• Pressure loss in unit 3.75 PSI/0.30 bar
  
• Maximum working pressure 125 PSI/10 bar
  
• Tested to pressure 250 PSI/20 bar
  
• Water connections 1/2" NPT
  
• Dimensions: H 14 3/16" x W 7 7/8" x D 4 1/8"
  
• Weight 5 lbs.

Energy Requirements

• Phase1, 208/240V, 7.2/9.6 KiloWatts, 35/40 Amps
  
• Minimum required circuit breaker size 40/50 Amps
  
• Recommended wire size AWG Copper 8

***Recommended Accessories

• Aqua Pure Hot Water Filter System - Recommended to prevent scale build up in all tankless water heaters.

Temporarily Backordered

This item ships UPS or FedEx ground. Delivery times related to these ship methods are usually between 2 and 5 business days once the product leaves the warehouse. We will email you tracking information once the product leaves our warehouse. UPS or FedEx ground deliveries do not require a signature and may be left at the ship to location. All deliveries will occur Monday through Friday.

UPS or FedEx ground deliveries do not include a guaranteed delivery date. Should you require a specific delivery date or expedited shipping please add the item to the shopping cart and view the shipping options drop down box. If the product is eligible for expedited shipping the shipping options and pricing will be listed. Please contact our customer service department with any questions related to shipping. (800) 297-6076, M-F, 8am to 5pm CST.